This time, I would like to introduce to you the series of Cleanroom door products mainly pushed by Tianjia Purification. Cleanroom door is also called clean door. Its special function is “cleaning function”. This article will also give different types of cleaning doors required by different applicable places, and recommend appropriate cleanroom door installation methods.
Workshop Cleanroom doors are currently widely used in food, electronics, biopharmaceuticals, hospitals and other fields. Because of the high cost of metal materials, Cleanroom doors are more expensive than general building doors. In addition to anti-corrosion and moisture-proof functions, the purified steel door can also be soundproof and temperature-proof, and the appearance is beautiful, flat, high strength, corrosion resistance, no dust, no dust, easy to clean and other advantages, these functions are derived from the use of raw materials.
The specific introduction of the production and installation of the Cleanroom door, the main raw materials of the Cleanroom door are galvanized sheet, stainless steel, melamine resin sheet, aluminum alloy profile. The middle sandwich is mainly aluminum honeycomb, paper honeycomb, rock wool and other high-strength flame retardant core materials. Ordinary door panels can be completely burned in 2 minutes in the ignition state, but flame retardant materials will not burn for a while when exposed to open flame, which is also supported by video.
Regarding the installation method of the Cleanroom door, what we usually use is the difference between the handmade panel and the machine-made panel. There are also two types of handmade panel installation, one is flush installation, which makes holes in the door frame and is fixed with steel nails, another one is Chinese aluminum installation, with grooves on the side of the door frame, which is also very easy to distinguish. The installation of the machine-made panel requires the installation of the clip-on door frame, and then the clip-on door cover installation. These installation steps can be completed in the factory, and the Cleanroom door will become very convenient when installed in the project, omitting many steps.
The galvanized steel sheet paper honeycomb Cleanroom door, 0.5 mm-1.2mm thick galvanized sheet is commonly used. Paper honeycomb also has its advantages and disadvantages. We have upgraded the quality of paper honeycomb. The aperture is smaller and the lighter cannot be ignited by open combustion. Aluminum honeycomb is a more expensive filling material than paper honeycomb and has better anti-beating performance.
Aluminum alloy materials are mainly edging in the use of Cleanroom doors. Aluminum alloy has strong plasticity and good gloss. Mellamine resin panel doors and general steel Cleanroom doors can be wrapped with aluminum alloy. The window inside the Cleanroom door also needs to be embedded with aluminum alloy strips, which can also be replaced by stainless steel.
The melamine resin board Cleanroom door, the special surface structure makes it resistant to engraving and scratch, even if it is hit by various hard objects, it can maintain no deformation, and if it is filled with high-quality paper honeycomb, it can achieve a 30-minute non-combustible effect.
Stainless steel clean doors are more expensive in price. General anti-collision free doors and so on are made of stainless steel, and there are more doors connected to the outside. The anti-collision stainless steel door will install an anti-collision leather surface on the door panel to better stress.
Tianjia cleanroom door has a 3000 monthly production capacity and strong production capacity. We sincerely invite all units in need to visit the factory for win-win cooperation!
Post time: Jan-30-2023